Удосконалення конструкції гарнісажної фурми та технології відновлення профілю робочого простору конвертера

Є.М. Сігарьов; М.М. Недбайло; Ю.В. Байдуж

Improving the construction of the garnissage tuyere and technology restoring the converter working space profile

Authors

E.N. Sigarev Dniprovsk State Technical University
N.N. Nedbailo Dniprovsk State Technical University
Yu.V. Bayduzh Dniprovsk State Technical University

Keywords:

profile, tuyere, lining, skull, converter, slag, refractory

Abstract

The article deals with the problems of «splash-slag» technology for the lining of the oxygen converter by blowing the converter’s slag, previously modified by magnesia additives, with the use of special lances.

Downloads

PDF (Ukrainian)

Published

02.07.2023

Issue

Vol. 26 No. 9-10 (2018): Metal and Casting of Ukraine

Section

Articles

License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Similar Articles

Alexander Kharchenko, Nataliia Lichkonenko, Thermodynamic analysis of physical and chemical processes in the high-temperature reaction zone of the liquid steelmaking bath. Part 1. Iron-oxygen, iron-oxygen-carbon systems , Metal and Casting of Ukraine: Vol. 30 No. 1 (2022): Метал та лиття України
L.S. Molchanov, A.S. Lantukh, Ye.V. Synehin, Determination of the rational profile of the lining of steel-teeming ladles to improve the removal efficiency of non-metallic inclusions , Metal and Casting of Ukraine: Vol. 26 No. 11-12 (2018): Metal and Casting of Ukraine
Mykola Rudenko, M. A. Kashcheev, Ye. M. Nagorny, R. M. Rudenko, O. V. Soroka, Research of efficiency of reduction of emissions from sintering zones of sintering machines , Metal and Casting of Ukraine: Vol. 29 No. 3 (2021): Metal and Casting of Ukraine
Oksana Vodennikova, Larisa Vodennikova, Desulfurization of steel: modern technologies, trends and prospects , Metal and Casting of Ukraine: Vol. 30 No. 1 (2022): Метал та лиття України
G. Yu. Kryachko, Ye. M. Sigarev, Assessment of changes in productivity and limitations in forcing movement when increasing the volume of blast furnaces , Metal and Casting of Ukraine: Vol. 31 No. 2 (2023): Metal and Casting of Ukraine
V.L. Mazur, О.V. Nogovitsyn, S.I. Klymenko, К.A. Sirenko, Priority Areas of Post-War Restoration of the Mining and Metallurgical Complex of Ukraine , Metal and Casting of Ukraine: Vol. 33 No. 2 (2025): Metal and Casting of Ukraine
G.Yu. Kryachko, Ye.M. Sigarev, The concept of axial movement of blast furnaces and temperature distribution on the horizon of air tuyeres , Metal and Casting of Ukraine: Vol. 32 No. 2 (2024): Metal and Casting of Ukraine
Volodymyr Valentynovych Kukhar , Khrystyna Vasylivna Malii , Vladyslav Valeriiovych Kustikov , Methods of Improving the Induction Crucible Melting Furnaces Lining Life and Monitoring Its Condition , Metal and Casting of Ukraine: Vol. 32 No. 3-4 (2024): Metal and Casting of Ukraine
D.O. Stepanenko, O.S. Vergun, V.H. Kisliakov, O.L. Rudenko, V.P. Petrusha, M.V. Pushkarenko, Selection of criteria and development of models for prediction of the physico-chemical properties of ladle’s slags in hot metal treatment , Metal and Casting of Ukraine: Vol. 28 No. 4 (2020): Metal and Casting of Ukraine
G.G. Nemsadze, A.F. Tonkushin, Quartz glass in steel metallurgy , Metal and Casting of Ukraine: Vol. 27 No. 10-12 (2019): Metal and Casting of Ukraine

Previous 21-30 of 81 Next

You may also start an advanced similarity search for this article.